I bought a HP MicroServer Gen8 G1610T and installed an Adaptec RAID card and hard drives which all supported hot-swap. I wanted to know what the limitation was with this server as I've hot-swapped Seagate SATA desktop drives in numerous QNAP NAS' and it always worked as expected. Turns out it's the disk caddies.
I wanted to enable basic roundrobin NIC teaming on my HP MicroServer Gen8. This configuration allows load balancing and fault tolerance. When transferring data to the server it will only be received via 1 NIC meaning a 1Gbps limit, but when sending data it will load balance over both NICs meaning you can achieve up to 2Gbps. A future article will describe how to enable 802.3ad LACP aggregation which will provide 2Gbps data transfers both ways. This post will also work on RHEL 7.